Item | Unit | Value | Test Method |
Support Cloth | Polyethylene Terephthalate (PET) |
Thickness of PET | Micron | 125 | / |
Coating | PVC on both sides |
Total weight | Gsm/m2 | 420±20 | DIN53352 BS3424 Method5A |
Width | m | 0.914, 1.10, 1.27, 1.37, 1.52, 1.60, 2.20, 3.20 |
Tensile Strength | N/5cm | Warp | 1182 | DIN53354 BS3424 Method6A |
Weft | 1173 |
Tearing Strength | N/5cm | Warp | 34 | DIN53356 BS3424 Method7A |
Weft | 27 |
Temperature Resistance | °C | -20~70 | DIN53357 BS3425 Method10 |
Flammability | Can be apply for B1, B2, M2, NFPA701, etc. |
Ink Printability | Solvent, Eco-solvent, UV and Screen printing |
Advantages: | 1.Non-curling at the edge and lay-flat appearance 2.Super smooth surface for high resolution printing. 3.Excellent printing performance. 4.Comparing to water-based inkjet media, print direct to substrate, no lamination needed. |
Applications | 1.Display system, eg, Roll-up, Pop-up, X-Banner, Scrolling banner. 2.Trade shows and Event Graphics 3.Any hanging banner and sign applications |
Conclusions and Announcements | Declaration by GLP: Please choose GLP products suitably according to relative provisions or industrial standards. GLP bears the responsibility for the specified technical and performance data on this page only. GLP is not responsible for any other liability. (The technical data on this page is calculated on average, and ±5% tolerance is acceptable) |
